Saturday, February 9, 2013

Lots of snow last night and blowing so it had built right up against the garage door which meant my usual lovely neighbour couldn't get his snowplow in to help. Out comes the snowblower, which had been returned from other neighbour (did I say I have great neighbours?) all fixed. Bit confusing as to what was wrong with it but something was missing and one important detail was a gas line switch was closed (that wasn't part of the youtube tutorial!). [Neighbour says to ditch my plan of taking the lawnmower to the same guy for services.]

So the blower started up and I managed to clean the driveway not too bad at all. Said neighbour was outside with me for a while and gave some useful pointers, not the least of which is that the driveway is on a huge incline and the best method of getting back to the top is to turn the snowblower around at the end, put it in transport and let it drive itself back up. Sounds easy but it's not very willing to drive itself. Second recommendation - wear ski goggles (check).
Notes to self:

  • switch on gas line - red switch on right (can stay on all winter)
  • black key in - turn on
  • speed high
  • choke on
  • pump a few times
  • pull starter cord - presto! (with any luck)
  • there are different gears for different kinds of snow; + reverse;  neutral; + transport
  • It's very sweaty work - so dress accordingly, although hands get cold so mitts are essential. 

As for other handyman jobs things have been relatively quiet. Or maybe it's the time of year for hibernation.

On to cabin thoughts...Google sketchup is giving me enough to show what I envision. The Bavarian folks took a while but eventually got back to me with a rough estimate for a 3 season cabin. I definitely need 4 and I'm not sure what they leave out in the 3 season so immediately wrote back and asked but haven't heard anything and that was quite some time ago.
I've also contacted a carpenter I found on Kijiji, He included photos so I'm pretty sure quality is good. I sent him my idea and subsequently we talked on the phone. His rough esitmate is higher than I'd thought it would be but he kept saying throughout the conversation that it could be lower  so I suspect he just throws out higher numbers rather than lower. The problem was that my sketch, as I suspected, wasn''t enough for him to give a really good quote. My next step then is to get a materials list made up. After that's done I'll reconnect with Robert. He was very nice, very helpful, and quite willing to take the job on. He also lives in the area and knows about getting building permits etc.
In the meantime I've also emailed Summerwood Homes in Toronto asking for a rough estimate but haven't heard back from them yet either. To be fair it was only a few days ago and since then the snow has hit Ontario so things are sluggish. I'm hoping they get back to me.

As for other things, I had a nice week away skiing and meeting up with friends and family in Mont Tremblant. Discovered I'm a terrible skier. Not that I didn't know that already but I was certainly hoping to be doing better after 3 days of lessons. A year off with a broken wrist clearly hasn't helped. Working on it though and I look forward to getting back to the local ski hill and testing out the level of improvement because I'm sure there's some even though I'm still really bad. Won't be this weekend I think because the roads are just not good for traveling at all. Dragged the cross-country skis out though and maybe I'll get out on those tomorrow. I love cross-country. Used to do a lot before I moved here 9 years ago but the snow here usually doesn't last long enough to get out there. I'm hoping that the chances are higher when the cabin's built. I suspect that area is more likely to get snow that stays. In any event it won't be such a long drive to find it.

For now it's a reading blogging day :)

Monday, January 21, 2013

Since my last post, and continuing on the handyman dilema:
- following in the footsteps of the lawnmower, the snow blower decided not to start, even though it was serviced and running tickedy boo in the summer. I'd googled the sequence of starting steps, followed them closely, gave it a tug....nothing. The neighbour gave it a try using an electric start (gotta get me one of those cables), claimed something wasn't right, and took it home to take a closer look....
- the propane fireplace pilot went out. After a fair bit of googling and lying on my stomach staring into fireplace bowels I finally got it going. Very exciting! (small successes mean a lot) - a) because it meant heat, and b) because I know in the past others who have faced the same challenge and not one of them had an easy time of it (one gave up!).
- one of the burners on the propane stove failed to light. The spark was there, the gas was there, but no fire was there. A bit of a conundrum because I'm sure we called in an expert when this happened once before. But surely not, - took a bit of trying and googling but a poke here and there and it was up and running again. Last time must surely have been something more severe causing the problem....surely?
- discovered water coming in the back of the truck. Only when it rains of course, which isn't much now since it's below freezing all the time. In fact I discovered the back seat pond while looking for the snow brush earlier in the winter just to be prepared for when snow would inevitably fall. Not exactly sure where it's coming in but next time it rains I'll be out there checking.

As for the cabin - the thinking and planning continues. Right now I'm learning all about sketchup. Very nice, and even though I'm not very good at it it's giving me a fair idea of what things will look like once complete. I've already decided to move the bathroom to a corner wall instead of using it as a separator between kitchen/living and sleeping areas.

So far I've been using 3D view to get the perspective but once I have something in plan view I'm going to send it off to a company in BC called Bavarian Leisure Cottages [http://www.bavariancottages.com/index.html]. This is the first prefab company I've found that has very simple type cabins that look nice on the outside and inside. Most other prefabs have too many rooms, and often more than one floor. All I want is a basic box, one level. My cabin design is still probably too simple but I figure I can see if they'd be willing to simplify one of the models they already have. If so, I need to know how much it's going to cost. I'm getting to the point where I need to figure out method. Basically I see two choices - if this prefab idea works out that would be one way, the other of course is to buy the material myself and hire a contractor.

First up in the spring will be to figure out location, get a perc test, get a building permit, clear the land and the driveway, then install sona tube concrete forms....



Tuesday, January 1, 2013

So I got ready for Christmas, went away to family, came home with a bad cold, and spent New Year's Day figuring out watts and amps and solar panel stuff.
But I learned a lot of stuff today, like how solar panels work - all about controllers and invertors and how it all fits together. I could buy one already made but if I so desired, I could make a solar panel myself. Doesn't look too difficult at all.
I may have forgotten to mention that during the crap Fall I bought a bit of property with the intention of putting up a cabin, close to the snowbelt and the ski hill, and wonderfully close to some lovely waters for kayaking. Now a lot of my thought is in what that cabin should look like, what are the steps needed to make it happen. So this is where the interest in solar comes from (and probably a lot of this blog is going to be about cabin building by an uneducated novice).

Generally here's some of what I learned today (and I make no bones about the fact that I was starting from absolute scratch, and also have the right to change any of this later if I decide I got it wrong):

  • a solar cell will generate about 70 milliwatts per square inch
  • a 12v battery is about 125 amps (it's written on the pack)
  • voltage x amps = watts and if you divide that by 1000 you get value per kw (kW/h)
  • watts/120 = amps 
  • controller - keeps the battery from draining
  • invertor - gets the solar power into the battery for storage
  • plexiglass, board with holes in it, solar cells, wire and some silicone  - and that's about it for a solar panel
I don't think I'd need much really, especially if I use a couple of those solar lights mounted through the roof for light. Other needs might be running a laptop for a couple of hours, cell phone charging, running an mp3 player, and what would be really nice would be to able to run a small fridge (which is about 100watts, or 8amps.
This all boils down to a need for (unless I've missed something important) about 18 amps of power - out of a 12v battery with 125amps - would run for 7 hours. Keeping in mind of course that there's only about 5 hours of really good sun catching time in the day, on a sunny day. 

Some solar panels move with the changing direction of the sun - bet that would be expensive.

Off to blow my nose...

Friday, December 7, 2012


More handyman challenges. I bought a nice little storage rack from Canadian Tire today. Easy to put together. All went well until the last screw. The damn thing wouldn't go in. I loosened all the other screws a bit more ('cos they weren't fully tight yet - I know you don't fully tighten until the very end) but that didn't help. Took it all apart and tried another screw in that spot but that didn't help either. The dowels have a metal shaft in them and this one was screwed. 

Step 1 - empty the box, lay all the pieces on the floor
Step 2 - put together...
Step 3- screwed...

Looks ok - screw the screw
Might have to glue that dowel. That's for tomorrow, along with back to the lighting. I bought 2 of those as well. We'll see how that goes.
So I started a blog last summer called Mostly Kayaking but it never got very far because my kayak stayed dry and all in all it was a crap summer and a crap fall and now I'm picking up and heading out on a somewhat new road full of challenges some big some small some fun some not- suffice to say here I stand one woman, one cat, one house, one yard, one car, one truck, one hell of a lot of stuff I know nothing about. And so the journey begins....

Saturday - it's the handyman things. There are lots of things around here that I actually do know how to do - or sort of know how to do and there are things I can probably maybe figure out but there's a lot of new stuff I have to learn. Even the small stuff. So today's plan: lawnmower, adding stabalizer so it could sit all winter. Stabalizer bought with the help of a friend so I knew I had the right stuff. Locate the jerry can, check how to open and close said jerry can. Measure out stabalizer into jerry can. Put in truck. Off to gas station. Pick up 10 liters. And I wanted to check the pressure in the truck tires but do you think I could figure out that gas station air pump. Check the guage it said- what gauge! (ok so I googled it when I got home and I think I could do it now). I just stood there looking at it and then got back in the truck. Since then my neighbour used a compressor thingy and put air in all the tires (which were really low btw). Back to the lawnmower. Put gas in. Pull starter cord. Nothing. Pull again...and again...and again... and so it goes. Nothing. Crap. See you in the spring lawnmower. Next on the list - put new light bulbs in the front door lights and the pole light out front. Got on the ladder (scary). Couldn't for the life of me get the light apart to even get close to a light bulb. Neighbour to the rescue again who said it's crap, and old, and I should get new ones. Next week....